View All
By Brand
By Size
Car Audio

View All
By Brand
By Power

Complete Kits
Car Audio

Installation / Calibration



Speaker Complete Kits   Exodus Kit 41   Exodus Kit 61   Exodus Kit 641   Exodus Kit 261   Exodus Kit 2641   Exodus Kit LCR  

Frequency response. Nearfield bass response spliced at 200 Hz. The response is 3 dB from 33 Hz to 20 kHz, anechoic. Over the critical 1 kHz to 10 kHz range, the response is an extremely flat at 1.5 dB. (click to enlarge)

Impedance magnitude. The impedance is extremely well controlled, with a minimum of 4 Ohms at 4.5 kHz. Below 2.8 kHz the impedance is always above 8 Ohms, making it a very gentle load for nearly any amplifier. (click to enlarge)

Exodus Audio Kit 61
Exodus Audio's Kit 61 is a 2-way design featuring the wonderful 6.5" Adire Audio Extremis 6.8 running to 3 Khz with a 6th order crossover and the fantastic Usher Audio 9950C-15 tweeter taking the upper frequencies.
This speaker kit is for those that want to run smaller mains but they are still small enough that they can be used for surrounds as well.
The Extremis features enough linear stroke (13mm each way) that you can expect extension to the low to mid 30Hz room anechoic with in room resonse easily reaching into the mid 20Hz range! They feature XBL^2 technology which keeps distortion at a minimum while giving them ability to reach those great linear excursion capabilities and a very flat Bl curve. They also feature a neo magnet which minimizes the sound "shadow" behind the driver while keeping them video shielded so you can place them right next to your video monitor for a home theater set up.

These speakers require a standard sized vented bookshelf enclosure of approximately .75 cu ft internal volume. The Parts Express .75 cu ft enclosures work quite well (which we can supply) or you can build your own enclosures using the included diagrams.

These speakers would work well as the mains and surrounds with the Extremis LCR as the center speaker speaker or you could run one (or two) as a center channel in order to run matching speakers all around.

The kit contains the tweeter, woofer, all crossover components, port, binding posts, etc. basically everything you will need except for the enclosures. This is an 8 ohm nominal design and amplifiers from 25 watts to 150 watts will work well. Rated sensitivity is 86dB SPL @ 2.83Vrms at 1 meter.

Click to read some Kit 61 reviews

$245.00 per speaker ($490/pair)

Shipping costs are approximately $10-$14 (per speaker) depending on your location.


Kit 61 Assembly Instructions

Kit 61 Enclosure Plans

Some other items you may need:

.75 cu ft Black blank enclosure $84.72ea

.75 cu ft Cherry blank enclosure $84.72ea

.75 cu ft Beech blank enclosure $84.72ea

(435) 730-4967 1375 W. 3275 S. Perry, UT. 84302 Send questions to:
[email protected]

© 2003 Acoustic Visions, LLC
All Rights Reserved